8 System Setup and Operation
8.1 HMI parts
8
2 31 4 5 6 7
9
10
WS009293A
11
FOP 312 has one set of Hand, Off, Auto buttons. FOP 321 has two sets of
buttons.
Number Part Description
1 Screen The screen shows the menu system.
2 Power on LED The blue color shows that the unit is in operating mode.
3 Alarm LED The light blinks red when there is an alarm.
4 Jog wheel The jog wheel is used for navigation and selection in the menus.
• Rotate it to navigate.
• Press it to select.
5 Home button The home button is used to return to the Home menu.
6 Back button The back button is used to return to the previous menu.
7 Status LEDs • Hand button: Orange when active
• Off button: Red when stopped
• Auto button: Green when active
8 Hand button The hand button is used to change from auto mode to manual mode.
9 Off button The off button is used to stop the unit or units, when manual mode is
used.
10 Auto button The auto button is used to change from manual to auto mode.
8 System Setup and Operation
28 Flygt FGC 400 Installation, Operation, and Maintenance
To Next Page
Loading...
