Xylem Flygt FGC 421 - 9.5 Restore the configuration settings

1. Insert the USB.
2. Go to Settings > Backup/Restore > Backup to USB > Proceed with backing
up configuration to USB?
3. Select the checkmark and confirm.
The configuration is saved to the USB.
4. Remove the USB.
9.5 Restore the configuration settings
The settings are erased at a firmware upgrade. If saved, they can be restored
after the upgrade.
1. Insert the USB.
2. Go to Settings > Backup/Restore > Restore from USB > Proceed with
restoring configuration from USB?
3. Select the checkmark and confirm.
The configuration is restored in the controller.
4. Remove the USB.
9 Maintenance
36 Flygt FGC 400 Installation, Operation, and Maintenance