Part Description
HMI Configuration The settings for the HMI screen.
Enable or disable the HMI buzzer.
• Backlight Timeout
• Backlight Level
• Contrast Level
• Buzzer Operation
24V Output Enabled The power output for modems.
Backup/Restore
Part Description
Backup to USB The activation of the backup function.
Restore from USB The activation of the restore function.
11.8 Inputs and outputs
The I/O option gives access to read-only parameters with information about all
incoming or outgoing signals.
Part Description
Digital Inputs The status of the digital inputs.
Analog Inputs The status of the analog inputs.
Voltage Inputs The voltage and phase angles on the incoming
power supply.
Current Inputs The motor phase currents and phase angles.
Digital Outputs The status of the digital outputs.
System Information The controller system information.
Digital Inputs
Part Description
Pump 1 OFF The input state for the off signal. Pump 1.
ON, OFF
Pump 1 HAND The input state for the hand signal. Pump 2.
ON, OFF
11 User Interface
50 Flygt FGC 400 Installation, Operation, and Maintenance
To Next Page
Loading...
