Part Description
Protocol • None
• Modbus Slave
• AquaCom Slave
Slave Address The controller address in the network.
Confirmation The confirmation of the setup wizard.
11.10 About
Part Description
Serial Numbers The serial numbers and update options of the HMI
and the controller.
• HMI
• Controller
Firmware Version The firmware versions and update options of the
HMI and the controller.
• Controller
• HMI
• HMI Bootloader
Reset Statistics This option leads to statistics and alarm history
reset.
Reset Controller This option leads to a complete reboot of the
controller. The configuration is not changed.
Reset HMI This option leads to a complete reset of the HMI.
Factory Reset This option leads to the setup wizard or to the
option to restore the configuration from a USB
drive. The existing configuration is reset to factory
default.
11 User Interface
54 Flygt FGC 400 Installation, Operation, and Maintenance
To Next Page
Loading...
