1. Eye
2. Shackle
3. Chain sling
4. Cable holder unit
5. Console
6. Shackle
7. Motor cable entrance unit
8. Optional block and tackle, manually operated
9. Optional block and tackle, electrically operated
Instructions for installing the cable handling system
Instructions for installing the Flygt Lift & Cable Handling System are given in the document
"Installation, Operation and Maintenance, Flygt Lift & Cable Handling System". For more
information, contact your local Xylem representative.
4.4 Install the diffuser adapter
Necessary equipment:
• Lifting chain with two hooks. See the illustration.
4 Installation
30 P7030, P7035, P7040 Installation, Operation, and Maintenance Manual