3
3 Amp
Fuse
10 Amp
Fuse
CONTROL 43670-0003
CIRCUIT PROTECTION
Two (2) automotive blade type fuses are included in the control.
One (10 amp) protects the bulb circuit, the other (3 amp) pro-
tects the motor circuit. In the event that it should be necessary
to replace a fuse, simply pull off the protective cover and slide
the fuse out.
DUAL STATION KIT
REPLACEMENT BULBS
PARTS LIST
ACCESSORY CABLE LISTING
Model Kit
60080-0012 12V 43670-0004
60080-0024 24V 43670-0004
Model No. Bulb
60080-0012 12V 18753-0455
60080-0024 24V 18753-0455
Part Number Description
43990-0013 10 FT. (3m) Cable Assembly
43990-0014 15 FT. (4.5m) Cable Assembly
43990-0015 25 FT. (7.6m) Cable Assembly
43990-0016 35 FT. (11m) Cable Assembly
*NOTE: A 15ft. (4.5m) wiring cable is provided with each light.
Additional lengths may be ordered. Duel station kits require
additional cables (see wiring diagram). Order cable length re-
quired from table below.
NOTE: Secure cable with nylon clips or zip ties.
Protect installation at points of stress, and leave adequate slack
where cable must be flexible.
Key Description Part Number
1 Bulb 12/24 Volt 18753-0455
2 Lower Housing 60072-1000
3 Upper Housing 60086-1000
4 Motor-Vertical (upper) 18753-0350
5 Motor-Horizontal (lower) 18753-0350
6 Base with Gasket 60088-1000
7 Drive Arm/Gear 18753-0457
8 Screw Kit 18753-0470
1
3
4
5
8
6
7
2
Not shown