We hereby declare, under our sole responsibility, that our product to which this
declaration relates has been designed to comply in accordance with the following
Directives:
Electromagnetic Compatibility Directive 2004/108/EC
Recreational Craft Directive 2003/44/EC
RoHS 2011/65/EU
With the relevant selections of the following Standards:
ISO 8846:1990 / Ignition Protection
ISO 8849:2003 / Electrically Operated DC Bilge Pumps
ISO 10133:2012 / Extra Low Voltage D.C. Installations
ISO 15083:2003 / Bilge Pumping Systems
This product is intended to be used in Bilge Pumping System for small craft with a hull
length up to 24 meters, as described within the introduction and scope of ISO 15083.
Install following the Provisions of the Recreation Craft Directives 2003/44/EC
Install to ABYC
H-22 and E-11
All mounting holes must
be sealed with
a marine grade
sealant to prevent
water intrusion.
To Next Page
Loading...
