SonTek, a Xylem brand
RiverSurveyor S5/M9 System Manual (February 2013)
129
Figure 112. Start Page
This screen is used to input site information, program system settings, rated discharge (to com-
pute percent measured for each station), and perform utility functions. Once you have input this
information you can press the Start a Measurement (F5) button to begin your measurement.
G-7.2 System Configuration
System configuration displays the system type (M9 or S5), the system serial number, and the
firmware version for reference purposes. No inputs are required in this section.
G-7.3 Step 1: Site Information
The Site Information dialog covers information related to the site itself, including the name and
personnel involved in the measurement.
It is recommended that all fields on this page be filled in prior to starting the measurement. This
data will be displayed in the Discharge Measurement Report, and will improve both the record
keeping and data review processes.
The Site Information dialog (Figure 113) will be displayed. Press the Tab key to step through
each of the displayed parameters.
To Next Page
Loading...
