Xylem WTW OxiTop-i - Commissioning the OxiTop System; 3.1 Scope of Delivery and Power Supply; 3.2 Initial Commissioning

Commissioning OxiTop
®
(-i/-IDS)
10 ba77059e01 03/2019
3 Commissioning
3.1 Scope of delivery
OxiTop
®
measuring heads are included in several scopes of delivery that con-
tain also other accessories or a varying number of measuring heads.
Here, only those scopes of delivery are listed that include only measuring
heads (without any other accessories):
 Measuring head / measuring heads (number of heads in set compositions)
– OxiTop
®
-IDS ( /2/6) (number: 1, 2 or 6)
– OxiTop
®
-IDS/B
– OxiTop
®
-i G
– OxiTop
®
-i B
– OxiTop
®
-i 6 (number: 3 x OxiTop
®
-i G and 3 x OxiTop
®
-i B)
– OxiTop
®
-i 12 (number: 6 x OxiTop
®
-i G and 6 x OxiTop
®
-i B)
 Operating manual
3.2 Power supply (OxiTop
®
measuring heads)
All OxiTop
®
measuring heads are supplied with power by batteries (see section
7T
ECHNICAL DATA).
3.3 Initial commissioning
No extra steps are required for the initial commissioning of an OxiTop
®
mea-
suring head.
Each measuring head can be assigned an individual ID (see section
4.6.2 S
YSTEM SETTINGS), so the measurement values can be correctly assigned
to the measuring heads and sample bottles.