Xylem WTW OxiTop-i - Operating the OxiTop Measuring Heads; 4.1 General Operating Principles

OxiTop
®
(-i/-IDS) Operation
ba77059e01 03/2019 11
4Operation
The OxiTop
®
-i measuring heads are exclusively operated with the keys on the
measuring heads.
The OxiTop
®
-IDS measuring heads are optionally operated via a wirelessly
connected control meter (Multi 3630/3620 IDS) or via the keys on the measur-
ing heads.
4.1 General operating principles
Keys In this operating manual, keys are indicated by brackets <..> .
The key symbol (e.g.
<ENTER>) generally indicates a short keystroke (under
2 sec) in this operating manual. A long keystroke (approx. 2 sec) is indicated
by the underscore behind the key symbol (e.g.
<ENTER_ >).
figure 4-1 Control panel example: OxiTop
®
-IDS
1 LED to indicate operating conditions
2 IDS measuring head (suitable for wireless communication)
3 Display
4Key
<M>
5Key
<ENTER>
6 Navigation key
< >
1
4
5
6
2
3
To switch a measuring head on, press any key.