Xylem WTW OxiTop-i - 4.2.5 Setting the Date

OxiTop
®
(-i/-IDS) Operation
ba77059e01 03/2019 15
4.2.5 Example on navigation: Setting the date
5. Using
< >, highlight the Language setting.
6. Using
<ENTER>, open the Language menu.
7. Select the required language with
< >.
8. Confirm the setting with
<ENTER>.
The menu is closed.
The measuring head is restarted.
The selected language is active.
1. Switch on the measuring head with
<M>.
The instrument ID is displayed.
2. Open the system menu with
<ENTER_>.
3. Using
< >, highlight the Clock function menu.
4. Using
<ENTER>, open the Clock function menu.
5. Using
< >, highlight the Date... setting.
6. Using
<ENTER>, open the Date... menu.
7. Using
< >, select the number for the highlighted digit.
8. Using
<ENTER>, confirm the number for the selected digit and go to the
next digit.
9. Repeat the two last steps for all digits.
Deutsch 
English
Français
Español
General 
Clock function 
Service 
25.01.2019