The following documentations are provided by us.
(1)
Introduction manual
(2)
Parts list
(3)
Electrical document
(4)
Other document provided by OEM partners
WARNING!!!
Please read these documentations thoroughly before using the machine. An
adequate training by the manufacturer or by OEM partner is required before starting
to use these machines.
WARNING!!!
It is the customers responsibility to ensure the machine is installed in a safe
operating position with all service pipes and cables clear of the operation area so as
not to cause a hazard. Access must be allowed for safe maintenance, swarf and oil
disposal including safe stacking of machine and unmachined components.
WARNING!!!
This machine is designed to cut common, metallic engineering materials (such
as steel and aluminum). DO NOT use to cut special materials (such as composites)
without agreement from XYZ Machine Tools. Any damage caused to the machine by
processing such materials will not be covered by the warranty.
NOTE!!!
The recipient hereof agrees not to copy or distribute this document without the
written consent.
To Next Page
Loading...