1. Connect Vehicle Battery.
2. Press the ON/OFF button and long press “BOOST” button for 3s until the LCD screen
displays “BOOST”.
3. Start the vehicle engine
Note:
1.This product is suitable for starting 12V vehicles (please make sure that the battery
voltage of this product is >13V).
2.Use the original jumper cable to start the car. If the clamps or power cables are
damaged, do not use this machine.
3.When using this product, please do not connect two clamps together. Otherwise,
this product will be damaged.
Safety tips: Do not press the BOOST button until the vehicle battery is properly connected
(red to positive and black to negative). Otherwise, it may damage the battery.
Jump Start Your Car
START
ENGINE
BOOST
%
W
3
EN
To Next Page
Loading...