Yaesu FT-857D - CAT Data Protocol Overview; Constructing and Sending CAT Commands

112 FT-857 Operating Manual
MENU MODE No•089
[
XVTR A FREQ
]
Function: Allows an arbitrary frequency to be set on the display, to allow direct frequency
readout during transverter operation; can also be used to account for frequency conversion
inaccuracies when a known reference frequency is known.
Available Values: 0,000,00 ~ 9999,999,00 (kHz)
Default: Current VFO frequency.
MENU MODE No•090
[
XVTR B FREQ
]
Function: Allows an arbitrary frequency to be set on the display, to allow direct frequency
readout during transverter operation; can also be used to account for frequency conversion
inaccuracies when a known reference frequency is known.
Available Values: 00,000,00 ~ 9999,999,00 (kHz)
Default: Current VFO frequency.
MENU MODE No•091
[
XVTR SEL
]
Function: Enable/disable the Transverter function.
Available Values: OFF/X VTR A/X VTR B
Default: OFF
OFF: Disables the Transverter operation feature.
X VTR A: Activates the transverter operation feature. The display frequency may be set via
MENU No-089
[
XVTR A FREQ
]
.
X VTR B: Activates the second transverter operation display. The display frequency may
be set via No-090
[
XVTR B FREQ
]
.
MENU OPERATION