Yaesu FT-857D - Power-On Microprocessor Reset Procedures

117FT-857 Operating Manual
Some or all transceiver settings can be reset to their factory-default states using one of the
following power-on routines:
r
[
V/M
]
+ POWER on: Resets all memories and following menu settings to their factory-
default values:
Menu #06 (AM STEP), 33 (DCS CODE), 52 (FM STEP), 56 (MEM TAG), 76 (RPT SHIFT),
82 (SSB STEP), and 83 (TONE FREQ).
r
[
FUNC
]
+ POWER on: Resets all menu settings (except the following menu items) to
their factory-default values.
Menu #06 (AM STEP), 33 (DCS CODE), 52 (FM STEP), 56 (MEM TAG), 76 (RPT SHIFT),
82 (SSB STEP), and 83 (TONE FREQ).
r
[
HOME
]
+ POWER on: CPU master reset for all memories and menu settings.
P OWER - ON M ICROPROCESSOR R ESET P ROCEDURES