VEM FT-8800 Quick Start (Rev “A”) Page 7
(6) SET Key
• Press this key momentarily to enter the Set (Menu) mode.
• Press and hold in this key for ½ second to transfer the contents of the Main band VFO into a Memory register.
LCD Display Screen
Icons
: Preferential Memory Channel
: Skip Memory Channel
: Minus Shift
: Plus Shift
: Odd Split
: Tone Encoder
: Tone Decoder
: Transmission in Progress
: Main Band
: Busy Channel (or Squelch Off)
: Memory Tune Mode
: Audio Mute Active
: Digital Code Squelch (DCS)
: 9600 bps Packet Mode
: Low TX Power Selected
: Middle TX Power Selected (No Icon indicates High TX Power)
: Automatic Power-Off Active
: Keypad/DIAL Lock Active
: Menu (Set) Mode
: Key Function Mode is set to KEY-2
Further information about the radio and its operations can be found in the Yaesu manual located within
your RACES form tote or Pelican case.
To Previous Page
Loading...
