Yaesu FT-8800R - Scan Function

COMMON TASKS
Yaesu FT-8800R Operating Manual (courtesy of W5JCK) Page 15 of 83
LOW function (factory default for button)
• Press the button to select the transmit power output level on the Main band.
• When the Main band is set to the Memory mode or Home Channel, press and hold in
this button for ½ second to switch the memory channel display between the
Frequency format and Alpha-numeric Tag format.
MHz function
• Press the button to allow tuning in 1-MHz step on the Main band VFO.
• Press and hold the button for ½ second to allow tuning in 10-MHz step on the Main
band VFO.
PRI function
• Press the button to activate the Priority feature on the Main band.
• No press and hold function for this button.
REV function
• Press the button to reverse the transmit and receive frequencies during split-
frequency operation.
• Press and hold the button for ½ second to select Repeater Shift direction on the Main
band.
RPTR function
• Press the button to select Repeater Shift direction on the Main band.
• No press and hold function for this button.
SCAN function
• Press the button to activate the Scanner on the Main band.
• When the Main band is set to the Memory mode, press and hold the button for ½
second to shift to the Memory Tuning feature.
SQL.OFF function
• Press the button to open the Squelch on the Main band to allow un-muted reception.
• Press and hold the button for ½ second to open the Squelch on the Main band to
allow un-muted reception.