MENU (SET) MODE
Yaesu FT-8800R Operating Manual (courtesy of W5JCK) Page 78 of 83
Menu #29 PG P2
Function:
Programs the MH−48A6J microphone’s P2 button assignment.
See Program the Microphone Buttons on page 14 for details.
Values:
BAND, VFO/MR, SCAN, SQL.OFF, TCALL, RPTR, PRI, LOW, TONE, MHz, REV, HOME
Default:
VFO/MR
Menu #30 PG P3
Function:
Programs the MH−48A6J microphone’s P3 button assignment.
See Program the Microphone Buttons on page 14 for details.
Values:
BAND, VFO/MR, SCAN, SQL.OFF, TCALL, RPTR, PRI, LOW, TONE, MHz, REV, HOME
Default:
TONE
Menu #31 PG P4
Function:
Programs the MH−48A6J microphone’s P4 button assignment.
See Program the Microphone Buttons on page 14 for details.
Values:
BAND, VFO/MR, SCAN, SQL.OFF, TCALL, RPTR, PRI, LOW, TONE, MHz, REV, HOME
Default:
LOW
Menu #32 RF SQL
Function:
Adjustd the RF SQL threshold level.
See Set the RF Squelch Level on page 25 for details.
Values:
OFF, S-2, S-5, S-9, S-FULL
Default:
OFF
This Menu Item can be set independently on both the left and right bands.
To Next Page
Loading...
