Yaesu M-1 User Manual

Features dynamic and condenser microphone elements for a rich, balanced voice signal.

Independent graphic equalizer for each microphone element, allowing flexible tone shaping.

Enhances high-frequency response and minimizes side interference for a unique tonal texture.

Utilizes magnetic contactless construction for smooth, durable, and sensitive PTT operation.

Explains the meaning of DANGER, WARNING, and CAUTION symbols used in the manual.

Essential instructions to prevent potential death or serious injury due to misuse.

Key safety guidelines to avoid severe injury, electric shock, or equipment damage.

Precautions to prevent physical impediments, minor injury, or equipment malfunction.

Details the On Air Indicator, PTT key operation, and the LOCK key function.

Describes the MIC unit, treble boost cowling, angle, and height adjustment mechanisms.

Explains the display modes and the nine graphic equalizer adjustment knobs.

Guide to adjusting equalizer bands, saving settings to memory, and using DUAL/C/D keys.

Details recording/playback features and the LC (Low Cut) and THR (THRU) keys.

Explains MIC GAIN knobs, SCOPE key functionality, and MONITOR Volume knob.

Details the POWER switch, DC IN 5V jack, and PHONES jack for audio monitoring.

Describes RX AUDIO IN, MIC Jack, and the professional Cannon (XLR) Microphone Connector.

Explains the PTT key operation selector switch and the RX ATTuation switch.

Step-by-step procedure to adjust the contrast level of the microphone's display.

Instructions for performing an all reset or resetting only the graphic equalizer.

Illustrates the frequency response curve for the condenser microphone element.

Illustrates the frequency response curve for the dynamic microphone element.

Shows the combined frequency response when both microphone elements are active.