Press , the display shows .
1
If the code is correct, you will hear a
confirmation sound, the display will
show and the door will open.
3
Enter your user code and press .2
Please note, if the incorrect user code is
entered you will hear a beep, the display will
show and the door will not open. If
the wrong user code is entered 4 consecutive
times an alarm will sound for approximately
1 minute, during which you will not be able to
open the safe with the electronic lock.
Close the safe door.1
Press followed by .
The bolts engage, locking the
door,
and the display shows .
2
Opening
the safe
1
3
2
Closing
the safe
2
code
close doorpress
To Next Page
Loading...