EasyManua.ls Logo

Yamaha 50H - User Manual

Yamaha 50H
251 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Loading...
40V/50H
OWNER’S MANUAL
MANUEL D’UTILISATION
MANUAL DEL PROPIETARIO
63B-28199-26
40V
50H
E
F
ES
63B-9-26 Hyoshi 00.5.25 2:25 PM y[W 1 (2,1)

Table of Contents

Other manuals for Yamaha 50H

Questions and Answers

  • A
    Adam StewartAug 28, 2025
    How to fix a Yamaha Outboard Motor when the starter will not operate?
    • J
      johnsontoddAug 28, 2025
      If the starter on your Yamaha Outboard Motor won't operate, here are some things to check: * The battery capacity might be weak or low – check the battery condition and use a battery of the recommended capacity. * Battery connections could be loose or corroded – tighten the battery cables and clean the battery terminals. * The fuse for the electric start circuit might be blown – check for the cause of the electric overload and repair it, then replace the fuse with one of the correct amperage. * Make sure the engine stop switch lanyard is attached and the shift lever is in neutral. If these steps don't resolve the issue, the starter components may be faulty, requiring service by a Yamaha dealer.
  • J
    James JonesNov 6, 2025
    What to do if my Yamaha 50H engine won't start but the starter operates?
    • M
      Maxwell MartinNov 7, 2025
      If your Yamaha Outboard Motor engine won't start but the starter is working, consider these potential issues: * The fuel tank might be empty – if so, fill it with clean, fresh fuel. * The fuel could be contaminated or stale – in this case, replace it with clean, fresh fuel. * A clogged fuel filter could be the problem – try cleaning or replacing it. * The starting procedure might be incorrect – refer to the "STARTING ENGINE" section. * The spark plugs could be fouled or of an incorrect type – inspect them, and clean or replace them with the recommended type. * Spark plug caps might be incorrectly fitted – check and refit them. * There may be poor connections or damaged ignition wiring – inspect the wires for wear or breaks, tighten any loose connections, and replace worn or ...
  • M
    Mark BairdNov 17, 2025
    What to do if my Yamaha 50H engine will not start?
    • L
      Lori NelsonNov 17, 2025
      If your Yamaha Outboard Motor's engine won't start even when the starter is working, there are several potential reasons. The fuel tank might be empty or the fuel could be contaminated. The fuel filter might be clogged, or the starting procedure might be incorrect. Other possible causes include malfunctioning fuel pump, fouled or incorrect spark plugs, incorrectly fitted spark plug caps, poor ignition wiring connections, faulty ignition parts, or a detached engine stop switch lanyard. In some cases, engine inner parts may be damaged. You can try to fill the tank with fresh fuel, clean or replace the fuel filter, inspect and clean/replace the spark plugs, check and refit the spark plug caps, check the wires for wear or breaks, tighten all loose connections, replace worn or broken wires and ...

Summary

Chapter 1 GENERAL INFORMATION

IDENTIFICATION NUMBERS

Record outboard motor and key identification numbers for reference and ordering spare parts.

SAFETY INFORMATION

Essential safety precautions for operating the outboard motor and boat, including warnings and guidelines.

FUELING INSTRUCTIONS

Detailed instructions on safely refueling the outboard motor, emphasizing fire and explosion hazards.

BATTERY REQUIREMENT

Specifications and precautions for selecting and connecting the correct battery for electric start models.

Chapter 2 BASIC COMPONENTS

MAIN COMPONENTS

Diagrams and identification of the main external parts of the outboard motor (40VMHD/50HMHD).

OPERATIONS OF CONTROLS AND OTHER FUNCTIONS

Explanation of the functions of various controls and components like fuel tank, tiller handle, and switches.

Chapter 3 OPERATION

INSTALLATION

Guidelines and warnings for correctly mounting and clamping the outboard motor onto the boat transom.

STARTING ENGINE

Step-by-step procedures for starting the outboard motor, covering manual and electric start models.

SHIFTING

Instructions for engaging forward and reverse gears, including safety precautions before shifting.

TRIMMING OUTBOARD MOTOR

Explanation of how trim angle affects boat performance and stability, with adjustment guidelines.

CRUISING IN SHALLOW WATER

Procedures and precautions for operating the motor in shallow water using the tilt feature.

Chapter 4 MAINTENANCE

SPECIFICATION DATA

Detailed technical specifications for various Yamaha outboard motor models (40VMHD, 40VETO, etc.).

TRANSPORTING AND STORING OUTBOARD MOTOR

Guidelines for safely transporting and storing the outboard motor, including trailering and fuel handling.

PERIODIC MAINTENANCE

Overview of regular maintenance tasks and recommendations for keeping the engine in optimal condition.

MAINTENANCE CHART

A schedule outlining recommended maintenance checks and intervals for various engine components.

GREASING

Instructions and diagrams for applying grease to specific lubrication points on the outboard motor.

CHECKING FUEL SYSTEM

Procedures for inspecting the fuel system for leaks, damage, and proper connections.

CHECKING PROPELLER

Instructions on how to inspect the propeller for wear, damage, and proper installation.

CHECKING BATTERY

Safety precautions and procedures for checking, connecting, and maintaining the battery.

Chapter 5 TROUBLE RECOVERY

TROUBLESHOOTING

A guide to diagnosing and resolving common problems with the engine's starting, running, and performance.

TEMPORARY ACTION IN EMERGENCY

Immediate actions to take in case of impact damage or failure of critical systems like power trim/tilt or starter.

Chapter 6 INDEX

INDEX

Alphabetical listing of topics and their corresponding page numbers for easy reference.

Yamaha 50H Specifications

General IconGeneral
Horsepower50 hp
Gear Ratio2.00:1
Starting SystemElectric
Cooling SystemWater-cooled
Shaft Length20 in
SteeringRemote

Related product manuals