5-2
5
WARNING
EWB00470
Throttle lever
• Make sure that operation is smooth. Lubricate cable and lever hous-
ing if necessary.
• Check cable free play, and adjust if necessary.
5-4, 8-26
Control cables • Make sure that operation is smooth. Lubricate if necessary. 8-36
Wheels and tires
• Check wheel condition, and replace if damaged.
• Check tire condition and tread depth. Replace if necessary.
• Check air pressure. Correct if necessary.
5-5, 5-6, 5-7
Brake and shift pedals
• Make sure that operation is smooth. Lubricate pedal pivoting points
if necessary.
8-38
Brake levers
• Make sure that operation is smooth. Lubricate lever pivoting points if
necessary.
8-37
Axle boots • Check for cracks or damage, and replace if necessary. 8-34
Chassis fasteners • Make sure that all nuts, bolts and screws are properly tightened. 5-7
Instruments, lights and
switches
• Check operation, and correct if necessary. 5-7
POTENTIAL HAZARD
Failure to inspect the ATV before operating.
Failure to properly maintain the ATV.
WHAT CAN HAPPEN
Increases the possibility of an accident or equipment damage.
HOW TO AVOID THE HAZARD
Always inspect your ATV each time you use it to make sure it is in safe operating condition.
Always follow the inspection and maintenance procedures and schedules described in the Own-
er’s Manual.
ITEM ROUTINE PAGE
U4S110E0.book Page 2 Friday, August 4, 2006 4:03 PM
To Next Page
Loading...
Need help?
General
