Yamaha BIG BEAR 400 User Manual

8-6
8
9 *
Drive shaft univer-
sal joint
• Lubricate with lithium-soap-based grease. √√√
10 * Chassis fasteners
• Make sure that all nuts, bolts, and screws are
properly tightened.
√√√√√
11 *
Shock absorber as-
semblies
• Check operation and correct if necessary.
• Check for oil leakage and replace if necessary.
√√√
12 * Stabilizer bushes
• Check for cracks or other damage, and replace if
necessary.
√√√
13 * Knuckle pivots • Lubricate with lithium-soap-based grease. √√√
14 * Steering shaft • Lubricate with lithium-soap-based grease. √√√
15 * Steering system
• Check operation and repair or replace if damaged.
• Check toe-in and adjust if necessary.
√√√√√
16 * Axle boots
• Check for cracks or other damage, and replace if
necessary.
√√√√√
17 Engine oil
• Change.
• Check ATV for oil leakage, and correct if neces-
sary.
√ √√√
18
Engine oil filter ele-
ment
• Clean or replace if necessary. √√√
19 Engine oil strainer • Clean. √√√
20 Differential gear oil
• Change.
• Check ATV for oil leakage, and correct if neces-
sary.
√√
NO. ITEM
CHECK OR MAINTENANCE
JOB
INITIAL EVERY
Whichev-
er comes
first
month136612
km
(mi)
320
(200)
1300
(800)
2500
(1600)
2500
(1600)
5000
(3200)
hours 20 80 160 160 320
U4S110E0.book Page 6 Friday, August 4, 2006 4:03 PM

Yamaha BIG BEAR 400 Specifications

General

Brand	Yamaha
Model	BIG BEAR 400
Category	Offroad Vehicle
Language	English