To Next PageTo Next Page
Need help?Do you have a question about the Yamaha C112V and is the answer not in the manual?
General| Product color | Black |
|---|---|
| Recommended usage | DJ |
| Multi-Room Streaming (MRS) support | - |
| Woofer | Yes |
| Speaker type | 2-way |
| Number of drivers | 2 |
| Speaker placement | Floor |
| Audio output channels | 1.0 channels |
| Woofer diameter (imperial) | 12 \ |
| Tweeter diameter (imperial) | 2 \ |
| Impedance | 8 Ω |
| Sensitivity | 97 dB |
| Frequency range | 60 - 16000 Hz |
| RMS rated power | 350 W |
| Signal-to-Noise Ratio (SNR) | 119 dB |
| Peak Music Power Output (PMPO) | 700 W |
| Connectivity technology | Wired |
Weight and Dimensions| Depth | 329 mm |
|---|---|
| Width | 416 mm |
| Height | 628 mm |
| Weight | 21300 g |
Follow basic precautions to avoid serious injury or death from electrical shock, fire, or hazards.
Guidelines for speaker placement and stand usage to prevent toppling or damage.
Precautions before connecting devices, handling, and operating the system.
Ensure amplifier power output matches speaker capacity to prevent damage from clipping.
Lists common causes of speaker damage, including feedback, high SPL, and distorted signals.
Explains the self-resetting poly switch that protects the high-frequency driver from excessive power.
Procedure to reset the poly switch by removing power for two to three minutes.
Emphasizes matching connection polarities of all speakers to the amplifier for correct phasing.
Instructions for wiring phone plugs for speaker connections using proper speaker cable.
Instructions for wiring Neutrik Speakon connectors for speaker input using proper speaker cable.
Details on connecting full-range speakers using phone jacks or Speakon connectors and parallel connection.
Guidance on checking amplifier load impedance and paralleling speakers based on impedance.
Diagram and explanation of using the PN90 crossover network for extended frequency range.
Key operating precautions for the PN90, including connection, impedance, and signal level adjustments.
Consult experts, choose strong hardware, and check fittings periodically for safe installation.
Instructions for suspending speakers using suspension wires and eyebolts.
Details on mounting speakers using optional brackets and specified screws.
Detailed specifications for various speaker models including LF, HF, frequency response, and power capacity.
Detailed specifications for subwoofer models including enclosure, frequency response, and power capacity.
Diagrams showing dimensions (W×H×D) for various speaker and subwoofer models.
Charts illustrating frequency response and impedance for different speaker models.
Polar plots showing horizontal directivity at various frequencies for different speaker models.
Polar plots showing vertical directivity at various frequencies for different speaker models.
