Why is there noise from the speakers or headphones of my Yamaha Musical Instrument?
If you're experiencing noise from the speakers or headphones of your Yamaha Musical Instrument CLP-115, it might be due to interference from a nearby mobile phone. Try turning off the phone or moving it further away from the instrument to resolve the issue.
What to do if the overall volume is low, or no sound is heard on my Yamaha Musical Instrument?
If your Yamaha Musical Instrument CLP-115 has a low overall volume or no sound, ensure the Master Volume isn't set too low by adjusting it using the [MASTER VOLUME] control. Also, check that headphones aren't connected to the headphones jack and that Local Control is turned ON.
What to do if the damper pedal has no effect on my Yamaha Clavinova CLP-115 Musical Instrument?
If the damper pedal of your Yamaha Musical Instrument has no effect, or the sound sustains continuously, ensure the pedal cord is securely inserted into the [PEDAL] jack.
Why does my Yamaha Clavinova CLP-115 make a clicking or popping sound when turned on or off?
A click or pop sound when turning a Yamaha Musical Instrument on or off is normal. This occurs when electrical current is applied to the instrument.
General| Type | Digital Piano |
|---|---|
| Number of Keys | 88 |
| Sound Source | AWM (Advanced Wave Memory) Stereo Sampling |
| Metronome | Yes |
| Amplifier | 20W x 2 |
| Touch Sensitivity | Hard/Medium/Soft/Fixed |
| Key Action | Graded Hammer |
| Keyboard | GH (Graded Hammer) keyboard |
| Polyphony | 32 |
| Effects | Reverb |
| MIDI | In/Out |
| Included Accessories | Bench |
| Speakers | 12 cm x 2 |
| Headphones | 2 x headphone jacks |
To Next Page
