Need help?Do you have a question about the Yamaha F250 and is the answer not in the manual?
General| Prop Shaft Horsepower | 250 hp |
|---|---|
| Full Throttle RPM Range | 5000 - 6000 rpm |
| Gear Ratio | 1.75:1 |
| Starting System | Electric |
| Displacement | 4169cc |
| Bore x Stroke | 96 x 96 mm |
| Fuel Induction System | EFI (Electronic Fuel Injection) |
| Ignition System | TCI (Transistor Controlled Ignition) |
| Alternator Output | 50 amps |
| Steering | Remote |
| Shaft Length | 25 in |
| Weight | 253 kg (557 lbs) - F250XCA |
| Recommended Fuel | Regular Unleaded (Minimum Octane 87) |
Guidance on understanding the manual and contacting dealers for assistance.
Observe crucial safety precautions for operating the outboard motor.
Awareness of propeller hazards and methods to avoid injury.
Importance and proper use of the engine shut-off cord (lanyard).
General safety measures for boating, including alcohol, PFDs, and passengers.
Techniques for preventing collisions with other vessels and obstacles.
Basic boating rules for vessel encounters, including right-of-way.
Recording serial numbers for outboard motor and control system.
Understanding CE marking and other regulatory compliance labels.
Detailed specifications for dimensions, weight, performance, and power unit.
Guidelines for motor mounting, horsepower rating, and optimal height.
Specifications for batteries, including capacity and types.
Guidance on choosing the correct propeller for your outboard motor and boat.
Recommendations for fuel type, octane, and additives.
Visual guide to the location of major outboard motor parts.
Details on digital electronic control, remote transmitter, and switch panels.
Operation of the control lever, throttle friction, and engine shut-off cord.
Information on main switch, start/stop switches, and power trim/tilt.
Overview of the 6Y9 gauge, showing engine status and alerts.
Details on overheat, low oil pressure, and engine trouble alerts.
Information on 6Y8 tachometers, speed, and fuel meters.
Describes various alerts and their meanings for the engine control system.
Details on overheat, low oil pressure, and water separator alerts.
Guidelines for proper placement and balancing of the outboard motor.
Impact of motor height on performance and cooling.
Procedures for first-time operation, including filling oil and breaking in the engine.
Essential checks before starting the engine, including fuel and controls.
Step-by-step guide to starting the engine safely, including security system use.
Information on shifting, stopping, trolling, and trimming the outboard motor.
Guidance for operating in shallow water and other conditions like saltwater.
Precautions for transporting and storing the outboard motor and fuel.
Procedures for cleaning the motor, flushing passages, and lubricating fittings.
Maintenance charts detailing service intervals and tasks.
Procedures for inspecting spark plugs and changing engine oil.
Procedures for changing gear oil and inspecting/replacing anodes.
Checking battery, connecting, and disconnecting procedures.
Diagnosing and resolving common engine and system problems.
Troubleshooting for security system, starter, and idling problems.
Resolving issues indicated by alerts, buzzers, or engine power loss.
Actions for impact damage, running on one engine, and replacing fuses.
Troubleshooting power trim/tilt and water separator alerts.
Details of warranty coverage, terms, and limitations for Yamaha outboard motors.
Information on obtaining repairs, customer responsibilities, and warranty exclusions.
To Next Page
