4-8
E
EMU00349
Lubrication
1) Remove the spark plug(s). Spray a
Yamaha “Stor-Rite Engine Fogging Oil”
into each cylinder for 10 seconds.
Grease the spark plug threads and rein-
stall the spark plug(s) and torque to
proper specification. (Refer to the
“CLEANING AND ADJUSTING SPARK
PLUG”).
2) Turn the engine over with the stop lan-
yard disconnected to work the fogging
oil into the piston rings.
3) Change the gear-case oil. (Refer to
“CHANGING GEAR OIL”). Inspect the
oil for the presence of water which indi-
cates a leaky seal. Seal replacement
should be performed by an authorized
Yamaha dealership prior to use.
4) Grease all grease fittings. (Refer to the
“GREASING”)
EMU00351
Cleaning and Anti-corrosion Measure
1) Wash down the exterior of the outboard
with fresh water and dry off completely.
2) Spray the engine’s exterior with
“Yamaha Silicone Protectant” (Part No.
LUB-SILCNE-13-00).
3) Wax the cowling with a non-abrasive
wax such as “Yamaha Silicone Wax”
(Part No. ACC-11000-15-02).
U68T14.book Page 8 Monday, April 1, 2002 4:32 PM
To Next Page
Loading...
