Need help?Do you have a question about the Yamaha FX500 and is the answer not in the manual?
General| Sampling Frequency | 44.1kHz |
|---|---|
| A/D Conversion | 16-bit |
| D/A Conversion | 16-bit |
| Frequency Response | 20Hz-20kHz |
| Weight | 2.5kg (5.5 lbs) |
| Type | Effects Processor |
| Effects | Reverb, Delay, Chorus, Flanger, Distortion, EQ |
| MIDI | In, Out |
Essential safety measures for handling, operation, and environmental considerations of the FX500.
Information regarding compliance with FCC regulations for radio noise emissions.
Overview of FX500 effects, memory configuration, and MIDI control features.
Instructions for connecting power, audio outputs, headphones, and control devices.
Understanding input jacks, level controls, signal indicators, and the LCD display.
Explains the function of effect stage keys, mode keys, and navigation arrows.
How to select, recall, and activate effect programs using the MEMORY mode.
Turning effect stages ON/OFF and reversing modulation/reverb order.
Adjusting effect parameters, assigning MIDI controls, and saving programs.
Parameters for Compressor, Distortion, and Equalizer effects.
Parameters for Chorus, Flanger, Symphonic, and Tremolo effects.
Parameters for Reverb, Early Reflection, Delay, and Echo effects.
Creating custom titles for saved effect programs.
Configuring MIDI channels, banks, and program change assignments.
Assigning MIDI control change numbers to controllers 1 and 2.
Assigning functions like memory increment or tap tempo to footswitches.
Defining the memory program range for footswitch selection.
Electrical characteristics, converters, sampling frequency, and impedance.
Details on front/rear panel controls, connectors, and power supply.
To Next Page
