Need help?Do you have a question about the Yamaha GRIZZLY 80 YFM80GT and is the answer not in the manual?
General| Displacement | 79cc |
|---|---|
| Bore x Stroke | 47.0mm x 45.6mm |
| Fuel System | Carburetor |
| Ignition | CDI |
| Final Drive | Chain |
| Drive System | 2WD |
| Rear Suspension | Swingarm |
| Rear Brakes | Drum |
| Engine Type | 4-stroke, SOHC, air-cooled, single-cylinder |
| Starting System | Electric |
| Transmission | Automatic |
| Front Suspension | Independent A-arms |
| Front Brakes | Dual drum |
| Length | 1, 470mm |
| Width | 840mm |
| Height | 900mm |
| Wet Weight | 148kg |
| Curb Weight | 148kg |
This section explains the manual's purpose, covering features, operation, safety, and maintenance.
ATV is not a toy; includes age recommendations and proper operation rules.
Emphasizes caution, good judgement, and skill development for safe ATV riding.
Details on recording key, vehicle, and model identification numbers.
Describes main switch, indicator lights, engine stop, start switches, and throttle.
Explains throttle lever, speed limiter, and brake lever/pedal operation.
Covers shift pedal, fuel tank cap, fuel cock, and choke lever.
Information on seat removal/installation and carrier load limits.
Inspects brake levers, pedal, and overall operation for safety.
Procedures for checking fuel and engine oil levels.
Checking tire condition, pressure, and wear limits.
Step-by-step instructions for starting cold and warm engines.
Covers starting, accelerating, decelerating, shifting, and break-in.
Guidelines for parking the ATV safely, including on slopes.
Introduction to recreational riding and basic techniques.
Emphasizes caution, judgement, and avoiding dangerous maneuvers.
Techniques for turning, climbing, descending hills, and crossing slopes.
Strategies for managing loss of traction and controlling slides.
Information on the owner's manual, tool kit, and necessary tools.
Table detailing periodic maintenance intervals based on time or mileage.
Procedures for measuring and replacing engine and final gear oil.
Instructions for inspecting spark plugs and cleaning air filter elements.
Guidance on carburetor adjustment and setting idle speed.
Checking brake shoe wear and adjusting lever/pedal free play.
Adjusting clutch free play and inspecting/lubricating control cables.
Procedures for wheel removal/installation and battery care.
Steps for replacing fuses and a troubleshooting guide.
Detailed steps for cleaning the ATV, including precautions.
Preventive measures for storing the machine for 60 days or more.
Lists overall dimensions, wheelbase, ground clearance, and basic weight.
Details engine oil type, classification, quantity, and fuel type/capacity.
Specifications for transmission, frame type, and tire details.
Specifications for brake types, suspension, electrical system, and fuse.
Provides conversion factors for metric to imperial units.
To Next Page