Need help?Do you have a question about the Yamaha LG-60 and is the answer not in the manual?
Ensure upper equipment is lighter; limit load to 20kg.
Align combined center of gravity over base stand center for stability.
Minimize gap between arm pipe and bottom plate to prevent twisting.
Remove top keyboard first to prevent stand from tipping backward.
Secure rails to the bottom of the lower keyboard using bind head screws.
Connect bottom plates to CP pipes, aligning with rail spacing.
Connect arm plates to CP pipes and adjust spacing for the upper keyboard.
Join the two CP pipe assemblies using pipe arms and tighten with hex wrench.
Slide the stand onto the rails and secure it with hex bolts.
Attach the hex wrench holder to the underside of an arm plate for convenience.
Ensure upper equipment is lighter; limit load to 20kg.
Align combined center of gravity over base stand center for stability.
Minimize gap between arm pipe and bottom plate to prevent twisting.
Remove top keyboard first to prevent stand from tipping backward.
Secure rails to the bottom of the lower keyboard using bind head screws.
Connect bottom plates to CP pipes, aligning with rail spacing.
Connect arm plates to CP pipes and adjust spacing for the upper keyboard.
Join the two CP pipe assemblies using pipe arms and tighten with hex wrench.
Slide the stand onto the rails and secure it with hex bolts.
Attach the hex wrench holder to the underside of an arm plate for convenience.
General| Brand | Yamaha |
|---|---|
| Model | LG-60 |
| Category | Racks & Stands |
| Language | English |
To Next Page
