Need help?Do you have a question about the Yamaha MONTAGE M6 and is the answer not in the manual?
General| Number of Keys | 61 |
|---|---|
| Arpeggiator | Yes |
| Type | Synthesizer |
| Sound Engine | AWM2, FM-X |
| Effects | Reverb, Chorus, Master Effect, EQ |
| Sequencer | 16-track |
| Connectivity | MIDI (IN/OUT/THRU) |
| Audio Inputs | 2 x 1/4" (L/R) |
| USB | Yes (TO HOST/TO DEVICE) |
Explains the fundamental internal architecture and data flow of the MONTAGE M.
Provides a workflow guide for configuring the MONTAGE M for live performance.
Details the process of recording and playback of Patterns, Songs, and Audio files.
Covers saving and loading all settings in User memory to and from a USB flash drive.
Explains how to connect and use microphones, CD players, and other audio devices.
Details connecting computers and external MIDI devices via USB and MIDI terminals.
Provides information on the Main and Sub displays and their indicators.
Allows selecting and modifying Performance settings to customize the instrument's sound.
Enables editing parameters for the entire Performance and the Audio Part.
Details parameters for AWM2 sound engine parts, including common and element settings.
Focuses on specific parameters and settings for editing Drum Parts within the AWM2 sound engine.
Details parameters specific to the FM-X sound engine, focusing on Operators and their settings.
Details parameters specific to the AN-X sound engine, focusing on Oscillators, Filters, and EG settings.
Details parameters related to setting up Oscillators, including Wave, FM, Ring Modulation, and Sync.
Details parameters for setting up the Noise Generator and its output destination.
Enables searching and selecting Performances based on category and attribute filters.
Allows searching and selecting Parts based on category, solo function, and parameter groups.
Details searching and selecting Rhythm Patterns to add to the current Performance.
Facilitates searching and selecting Arpeggio types based on category, bank, and attributes.
Enables searching and selecting Waveforms from categories and banks.
Allows calling up Performances and managing banks, pages, and slots for live performances.
Details the process of registering Performances to Live Set slots.
Covers editing Live Sets, including saving banks, pages, and slots for user-defined sets.
Allows setting common parameters like Tone Generator, Keyboard, and MIDI configurations.
Enables detailed adjustment of micro tuning settings for Parts and global tuning.
Provides preset configurations for connecting external devices and recording.
Covers setting audio signal input and output, including USB and analog connections.
Details MIDI input/output settings, including terminals, channels, and synchronization.
Covers detailed instrument settings like controller assignments, DAW remote, and system preferences.
Allows setting instrument parameters such as Power on Mode, calibration, and data initialization.
Covers loading and saving files and data, including User files, Library files, and backups.
Prevents accidental operation during live performances by locking the panel controls.
Sets the Split function to divide the keyboard into sections for playing different sounds.
Defines the note range for the Part, allowing specific key assignments.
Provides convenient and instant navigation for editing various parameters.
Allows checking effect settings and accessing advanced settings for effects.
Enables controlling DAW software from the instrument's controllers for convenient music production.
Registers combinations of Source and Destination to control sound parameters via various controllers.
Allows checking the settings of the controller being operated and its configuration information.
Lists and describes all available effects, categorized into Delay, Chorus, Flanger, etc.
Details parameters for each effect type, including their function and settings.
Provides solutions for common problems such as no sound, distorted sound, and incorrect settings.
To Next Page
