To Next PageTo Next Page
Need help?Do you have a question about the Yamaha MOTIF XS8 and is the answer not in the manual?
General| Polyphony | 128 notes |
|---|---|
| Wave ROM | 355MB (when converted to 16-bit linear format) |
| Arpeggiator | Yes |
| Sequencer | Yes |
| Type | Workstation Synthesizer |
| Keyboard | 88 keys, Balanced Hammer Effect (BH) |
| User Voices | 128 x 3 Normal Voices + 32 Drum Kits |
| Effects | Reverb, Chorus, Master Effect, Part EQ |
| Arpeggiator Types | Approx. 6, 000 types |
| Display | 320 x 240 dots, backlit LCD |
| Connectivity | USB, MIDI In/Out/Thru |
| Sampling | Yes |
| Preset Voices | 1, 024 Normal Voices + 64 Drum Kits, GM: 128 Normal Voices + 1 Drum Kit |
Product contains lead solder and other chemicals. Handle with care.
Steps to navigate the file system, create directories, and manage files on USB storage.
Procedure to save all user data or specific data types to USB storage.
Diagram identifying controls and connections on the top panel of the MOTIF XS.
Identification of rear panel connectors such as power, Ethernet, USB, and audio outputs.
Safety and handling guidelines for disassembling the MOTIF XS8 unit.
Safety guidelines, warnings, and cautions for installing optional hardware like DIMMs and mLAN.
Step-by-step instructions for installing and removing DIMM memory modules.
Detailed list of LSI pins, their names, I/O, and functions for various ICs.
Diagrams showing the layout and component placement for various internal circuit boards.
Introduction to the test program, overview of tests, and general procedures for manual and MIDI modes.
Instructions for entering the test program in MANUAL MODE and MIDI MODE.
Procedure to write and verify the MAC address on the DM circuit board for Ethernet.
Tests for verifying EBUS IC ID numbers and checking LCD/LED functionality.
Procedure to test all panel switches and LEDs for proper operation and brightness.
Instructions for testing the encoder's smooth operation and value changes.
Procedure to test the smooth operation and value changes of knobs 1 through 8.
Instructions for testing the smooth operation and value changes of sliders 1 through 8.
Procedure to check the normal operation of keyboard keys.
Test for keyboard operation, velocity, and After Touch functionality.
Procedure to test the Pitch Bend, Modulation Wheel, and Ribbon Controller operations.
