Yamaha MOX8 Service Manual

90
MOX6/MOX8
List of the updating Flash ROM
Main Program DM IC312
File name
• 8J60OS_.PGM (Common to MOX6/MOX8)
Tool required for update
• USB fl ash memory (with the program data)
How to install
Never turn off the instrument while installing until "Completed" is displayed.
It will take a few minutes to complete the installation.
Especially, in case that it is turned off by accident soon after the installation starts, it may break the boot fl ash ROM.
To repair it, you have to replace the fl ash ROM on board with new one.
Also, never unplug the USB fl ash memory from the [USB TO DEVICE] terminal while installing.
/(9(/0(7(56(/(&76ZLWFK >5(&@6ZLWFK
>86%72'(9,&(@7HUPLQDO
>32:(5@6ZLWFK
■
VERSION UPGRADE
Download the version upgrade program from the Yamaha offi cial website.
When the installation is executed, the user's data will be lost. Therefore, back up the user's data in advance.

Yamaha MOX8 Specifications

General

Polyphony	64 notes
Arpeggiator	6, 720 types
Display	240 x 64 dot LCD
Sound Engine	AWM2
Multitimbral Capacity	16 parts
Wave ROM	355MB (when converted to 16-bit linear format)
Keyboard	88-key, Graded Hammer Standard (GHS) keyboard
Effects	Reverb, Chorus, Insertion Effects, Master Effects, EQ
Sequencer	16-track
Connectivity	USB, MIDI In/Out, Phones, Output L/Mono, R, Foot Controller, Footswitch, Damper
Dimensions	1, 320 x 405 x 168 mm