Need help?Do you have a question about the Yamaha MT125 and is the answer not in the manual?
General| Engine Type | Liquid-cooled, 4-stroke, SOHC, 4-valves |
|---|---|
| Displacement | 124.7cc |
| Bore x Stroke | 52.0 mm x 58.6 mm |
| Compression Ratio | 11.2:1 |
| Fuel System | Fuel Injection |
| Ignition System | TCI |
| Starter System | Electric |
| Transmission | Constant Mesh, 6-speed |
| Final Drive | Chain |
| Front Brake | Hydraulic single disc, Ø292 mm |
| Rear Brake | Hydraulic single disc, Ø220 mm |
| Front Tyre | 100/80-17 M/C |
| Rear Tyre | 140/70-17 M/C |
| Dimensions (L x W x H) | 1, 960 mm x 800 mm x 1, 065 mm |
| Seat Height | 810 mm |
| Minimum Ground Clearance | 140 mm |
| Wet Weight | 142 kg |
| Rear Suspension | Swingarm |
| Maximum Torque | 11.5 Nm (1.16 kg-m) @ 8, 000 rpm |
Owner's responsibility for safe motorcycle operation and knowledge of requirements before riding.
Guidelines for safe motorcycle operation, including pre-operation checks and visibility.
Recommended safety gear to prevent injury during motorcycle accidents, emphasizing helmets and protective clothing.
Precautions against deadly carbon monoxide gas from engine exhaust in enclosed or poorly ventilated areas.
Guidelines for safely adding accessories or cargo to the motorcycle to maintain stability and avoid accidents.
Diagram and identification of the motorcycle's handlebar controls, levers, and dashboard instruments.
Operation of the main switch for ignition, lighting, and steering lock functions.
Explanation and identification of various indicator and warning lights on the instrument panel.
Function and check procedure for the engine trouble warning light indicating electrical circuit issues.
Operation and meaning of the ABS warning light for models equipped with Anti-lock Brake System.
Functionality and activation/deactivation of the tachometer's high-rpm warning light.
Overview of the multi-function meter unit, its components, and display capabilities.
Procedure for starting the engine, including ignition circuit cut-off system requirements.
Critical break-in period guidelines for the first 1000 km to ensure engine longevity.
Schedule for checking and maintaining emission control system components based on mileage.
Schedule for general maintenance and lubrication tasks based on mileage and annual checks.
How to check engine oil level, change oil, and replace the oil filter element.
Procedure for checking and maintaining the coolant level in the reservoir and radiator.
Essential maintenance for tires, including air pressure, inspection, and type specifications.
How to inspect front and rear brake pads for wear using indicator grooves.
Procedure for checking the brake fluid level and replenishing if necessary.
Information on changing brake fluid, oil seals, and brake hoses at specified intervals.
Maintenance of the battery, including checking electrolyte level and lead connections.
Procedure for identifying, removing, and replacing blown fuses in the fuse box.
Instructions for removing and installing the front wheel on non-ABS models.
Instructions for removing and installing the rear wheel on non-ABS models.
General guidance on troubleshooting common motorcycle problems and when to seek dealer assistance.
Diagnostic flowcharts for common starting and engine performance issues.
Steps to take if the engine overheats, including safety precautions for the radiator cap.
To Next Page
