With the engine turned off:
1. Set engine stop switch to run position.
2. Turn main switch to on position.
3. Shift transmission into neutral.
4. Push the start switch.
Does the engine start?
The neutral switch may not be working correctly.
The vehicle should not be ridden.
5. Stop the engine.
6. Set engine stop switch to run position.
7. Shift transmission into gear.
8. Pull the clutch lever.
9. Push the start switch.
Does the engine start?
The clutch switch may not be working correctly.
The vehicle should not be ridden.
NOYES
The system is OK. The motorcycle can be ridden.
YES
NO
If a malfunction is noted, have the vehicle
inspected by a Yamaha dealer before riding.
WARNING
To Next Page
