Yamaha O1V96 User Manual

36 Chapter 3—Operating Basics
01V96 Version 2—Owner’s Manual
-Stereo page
This page displays the Stereo Out output level.
If you selected the CH1-32 page or the Master page, use the MASTER MODE parameter to
select one of the following three metering signal types:
• GATE GR....................... The amount of gain reduction for the gate (only for CH1-32)
• COMP GR..................... The amount of gain reduction for the compressor
• LEVEL ........................... Input Channel input level, or Output Channel output level
4To activate the Peak Hold function, move the cursor to the PEAK HOLD but-
ton, then press [ENTER].
The PEAK HOLD button turns on, and the peak level is held on the meters on the page. To
cancel the Peak Hold function, turn the PEAK HOLD button off.
Tip: These pages also allow you to change the metering position using the POSITION param-
eter. This parameter setting operates in unison with the Meter | Position page setting.

Yamaha O1V96 Specifications

General

Brand	Yamaha
Model	O1V96
Category	Music Mixer
Language	English