What to do if my Yamaha Portatone PSR-K1 Electronic Keyboard has no sound?
If there is no sound even when the keyboard is played or when a song or style is being played back on your Yamaha Electronic Keyboard, first, check that nothing is connected to the PHONES/OUTPUT jack on the rear panel. When headphones are plugged into this jack, no sound is output. You may also need to check the Local Control on/off.
Why playing keys in the right hand area of Yamaha Electronic Keyboard does not produce any sound?
If playing keys in the right hand area of the keyboard does not produce any sound on your Yamaha Electronic Keyboard, it may be because you are using the Dictionary function. When using the Dictionary function, the keys in the right hand area are used only for entering the chord root and type.
What to do if Yamaha Portatone PSR-K1 Electronic Keyboard volume is too soft?
If the volume is too soft, the sound quality is poor, the rhythm stops unexpectedly or will not play, the recorded data of the song does not play correctly, or the LCD display suddenly goes dark and all panel settings are reset on your Yamaha Electronic Keyboard, the batteries are likely low or dead. Replace all six batteries with completely new ones, or use the included AC adapter.
How to turn on auto accompaniment on Yamaha Portatone PSR-K1 Electronic Keyboard?
If the auto accompaniment doesn’t turn on even when pressing the [ACMP ON/OFF] button on your Yamaha Electronic Keyboard, make sure the Style mode is active before using the auto accompaniment. Press the [STYLE] button to enable style operations.
Why does Yamaha Portatone PSR-K1 style not sound properly?
If your Yamaha Electronic Keyboard style does not sound properly, make sure that the Style Volume is set to an appropriate level and that the Split Point setting is appropriate for chord play. If not, set the Split Point to the proper position.
What to do if Yamaha Portatone PSR-K1 style or song does not play back?
If the style or song does not play back even when pressing the [START/STOP] button on your Yamaha Electronic Keyboard, ensure that 'External Clock' is set to OFF.
How to change language on Yamaha Portatone PSR-K1?
If the Demo display is shown in Japanese, or there are Japanese characters in the display messages on your Yamaha Electronic Keyboard, make sure the Language setting in the FUNCTION display is set to English.
Why does my Yamaha Portatone PSR-K1 Electronic Keyboard produce noise when using a mobile phone?
If you are using a mobile phone in close proximity to your Yamaha Electronic Keyboard, it may produce interference, causing noise. To prevent this, turn off the mobile phone or use it further away from the instrument.
Why can't I hear the rhythm on my Yamaha Portatone PSR-K1 Pianist styles?
When playing back one of the Pianist styles (#124 – #135) on your Yamaha Electronic Keyboard, the rhythm cannot be heard because this is normal. The Pianist styles have no drums or bass — only piano accompaniment.
Why does Yamaha Portatone PSR-K1 Electronic Keyboard footswitch produce the opposite effect?
If the footswitch (for sustain) seems to produce the opposite effect on your Yamaha Electronic Keyboard, the polarity of the footswitch is likely reversed. Make sure that the footswitch plug is properly connected to the SUSTAIN jack before turning on the power.
General| Type | Portable Keyboard |
|---|---|
| Number of Keys | 61 |
| Number of Voices | 100 |
| Number of Styles | 100 |
| Effects | Reverb, Chorus |
| Headphone Jack | Yes |
| MIDI | Yes |
| Power Supply | Batteries |
| Display | Custom LCD |
Instructions for connecting the Yamaha PA-5D adaptor to the instrument and power outlet.
Instructions for opening the compartment, inserting six D-size batteries correctly, and closing the cover.
Instructions for the first lesson stage focusing on practicing timing with the right hand.
Step-by-step guide to selecting a User song number to begin recording.
Instructions for preparing a new or blank SmartMedia card for use by formatting it.
Method to access and adjust detailed instrument settings via the FUNCTION display.
To Next Page