To Next PageTo Next Page
Need help?Do you have a question about the Yamaha R3 2023 and is the answer not in the manual?
General| Bore x Stroke | 68.0mm x 44.1mm |
|---|---|
| Compression Ratio | 11.2:1 |
| Fuel Delivery | Fuel injection |
| Transmission | 6-speed |
| Final Drive | Chain |
| Front Tire | 110/70-17 |
| Rear Tire | 140/70-17 |
| Length | 82.3 in |
| Height | 44.9 in |
| Seat Height | 30.7 in |
| Wheelbase | 54.3 in |
| Rake (Caster Angle) | 25° |
| Trail | 3.7 in |
| Fuel Capacity | 3.7 gal |
| Wet Weight | 375 lb |
| Ground Clearance | 6.3 in |
| Ignition | TCI: Transistor Controlled Ignition |
| Front Suspension | 37 mm telescopic fork; 5.1-in travel |
| Rear Suspension | Single shock, adjustable preload; 4.9-in travel |
| Front Brakes | Hydraulic disc, 298mm |
| Rear Brakes | 220mm hydraulic disc |
| Engine Type | 321cc liquid-cooled, DOHC inline 2-cylinder; 4 valves per cylinder |
Owner's duties for safe operation and essential riding tips.
Importance of protective gear and awareness of riding hazards like CO.
Guidelines for loading cargo and using aftermarket parts safely.
Identification of major motorcycle components from left and right side views.
Operation of the main switch and steering lock positions.
Details on various indicator and warning lights on the instrument panel.
Overview of the meter unit, its displays, and functions.
Description of left and right handlebar switch controls.
Operation of clutch lever, shift pedal, brake lever, and pedal.
Instructions for fuel tank cap operation and safe fueling practices.
Seat removal/installation and shock absorber adjustment.
Sidestand operation and ignition circuit cut-off system function.
Guidelines for breaking in the engine during the initial period.
Steps and precautions for starting the motorcycle.
How to shift gears and safely park the vehicle.
Contents of the tool kit and overview of maintenance schedules.
Procedures for checking brake pads, fluid, and hoses.
Adjusting drive chain slack and lubricating cables.
Lubricating levers, pedals, and bearings.
Battery care and procedures for replacing fuses.
Replacing bulbs and a guide to diagnosing problems.
Steps to take if the engine overheats.
Specifics for cleaning matte finishes and general washing.
Post-wash steps and recommendations for vehicle storage.
Location of VIN, serial numbers, and data recording info.
How to report safety defects and understand noise regulations.
A log for maintenance history and details of the limited warranty.
Warranty Q&A, dealer responsibilities, and extended service plan info.
