RAV-2000
Intelligent Touch Panel
Remote Control
Quick-Start Guide
INSTALLING THE BATTERIES
1. Locate the battery door on the RAV-2000’s back and slide it off.
2. Use the indicators to match and insert the four (4) AA
batteries (included).
3. Slide the battery door back on.
After a short time, the RAV-2000 will start up automatically and
beep twice to indicate it is ready to use.
NOTE: To adjust the contrast, use the Contrast Dial on the left side
of the unit.
RAV-2000 Quick-Start Guide
2
To Next Page
