Fuel petcock inspection and cleaning
The fuel petcock has a built-in filter to
remove any particles before they reach the
carburetor. If the filter becomes blocked, the
fuel cannot enter the carburetor. To prevent
this,
inspection and cleaning should be done
at recommended intervals.
1.
First, turn the petcock lever to the
"OFF"
position; then remove the filter
cup and clean the bottom of the cup
with solvent.
Clutch adjustment
This model has two clutch cable length ad-
justers and a clutch mechanism adjuster.
Cable length adjusters are used to take up
slack from cable Stretch and to provide suf-
ficient free play for proper clutch Operation
under various operating conditions. The
clutch mechanism adjuster is used to provide
— 91 —
1. Filter cup 1. Cuve de decantation 1. Filtergehäuse
To Next Page
