Yamaha SR-C20A Quick Start Guide

10 En
Audio content from a Bluetooth device (such as a smartphone) can
be played through the sound bar.
1 Press BLUETOOTH to switch the input source to
Bluetooth.
2 On the Bluetooth device, enable the Bluetooth
function.
3 Select your product displayed within the list.
“Yamaha SR-C20A” or “YamahaAV” is displayed within the list.
4 Play audio content on the Bluetooth device.
The sound bar will begin playing audio from the Bluetooth
device.
 NOTE
• The sound bar can be connected to two Bluetooth devices
simultaneously (multipoint connection).
• Two Bluetooth devices cannot be played simultaneously. You will
need to stop playback on the Bluetooth device and then start
playback on the other Bluetooth device.
By installing the free dedicated app “Sound Bar
Remote” on a mobile device (such as a smartphone),
the sound bar can also be controlled from the mobile
device.
Search for “Sound Bar Remote” on the App Store or
Google Play and install it on the mobile device.
The main app functions are as follows:
• Turn the power on/off, select an input source, adjust the volume,
and adjust subwoofer volume
• Switch between sound modes
• Enable or disable the Bass Extension and Clear Voice features
• Change the brightness of the indicators on the front of the sound
bar (Dimmer)
 NOTE
• To control the sound bar using the app, configure the settings on
your mobile device as follows:
– Enable the Bluetooth function.
– For Android devices, configure the settings to allow location
information to be obtained.
The Sound Bar Remote app only uses location information from
the Android device to detect the sound bar. Your personal
information will not be collected.
• This sound bar is only compatible with the Sound Bar Remote app.
The sound bar cannot be controlled using other apps (such as
Sound Bar Controller).
Listening to audio from a
Bluetooth® device
Bluetooth device
Controlling the sound bar with the
app

Yamaha SR-C20A Specifications

General

Product color	White
TV stand usage	-
Construction type	Assembly kit
Smartphone remote support	Yes
Audio decoders	Dolby Digital, Dolby Pro Logic II
RMS rated power	100 W
Audio output channels	- channels
Tweeter impedance	6 Ω
Soundbar speaker RMS power	40 W
AC input voltage	100-240 V
AC input frequency	50 - 60 Hz
Power consumption (standby)	0.2 W
Power consumption (typical)	13 W
Cables included	AC, Optical
Subwoofer location	Built-in
Subwoofer frequency range	65 - 230 Hz
Wi-Fi	No
Bluetooth version	5.0
Connectivity technology	Wired & Wireless
Digital audio optical in	2

Weight and Dimensions

Depth	94 mm
Width	600 mm
Height	64 mm
Soundbar weight	1800 g