Yamaha THR10C User Manual

11
Names And Functions
n Tips on Creating Sound
Use the BLEND/GAIN
t knob to mix the
amount of direct pickup sound with the mic
simulation sound when any mic type (except
for EG CLN) is selected. Control the guitar’s
volume with the VOLUME
!4 knob.

Mic/Amp Type Descriptions: THR5A
CONDENSER: The condenser microphone
setting gives the acoustic guitar a rich,
midrange tone.
DYNAMIC: The dynamic microphone setting
gives the acoustic guitar a tight tonal core.
TUBE: The tube microphone setting gives the
acoustic guitar a rich midrange tone.
NYLON: Perfect for use with an acoustic-
electric classical or nylon string guitar.
EG CLN: This setting is designed for electric
guitars and delivers a clear, rich, clean
tone characteristic of an American combo
amp and the characteristic sound of a 12-
inch speaker cabinet.
t GAIN (THR10/10C/10X and THR5 only)
Adjusts the amount of guitar distortion.
Rotate the knob clockwise to increase the
amount of distortion.
* On the THR10/10C, the blend function, which
blends the pickup direct sound with the mic simu-
lation sound, is active when ACO is selected with
the AMP r control. (Setting the blend function
to its minimum level produces the pickup direct
sound only while a maximum setting produces
the mic sound only.)
t BLEND/GAIN (THR5A only)
Blends the direct sound of the pickup with
the sound of the mic simulation when a
MIC TYPE
r other than EG CLN is selected
(the minimum setting is direct sound only,
maximum setting is microphone only).
When EG CLN is selected as the MIC TYPE
r, it adjusts the amount of distortion in the
guitar sound. Turning the knob clockwise
increases the amount of distortion.
y MASTER
Adjusts the volume for the amp section.
Rotate the knob clockwise to increase
volume while reproducing compression and
poweramp distortion of the simulated amp.
* Only adjusts the volume when BASS, ACO,
or FLAT is selected with the AMP r control
(THR10/10C/10X only).
* On the THR5A, this control only adjusts the
volume when a MIC TYPE r other than EG CLN is
selected.
u BASS (THR10/10C/10X only)
Tone adjustment for the guitar’s sound.
Rotate the knob clockwise to enhance the
low range frequencies.
i MIDDLE (THR10/10C/10X only)
Tone adjustment for the guitar’s sound.
Rotate the knob clockwise to enhance the
mid-range frequencies.
o TREBLE (THR10/10C/10X only)
Tone adjustment for the guitar’s sound.
Rotate the knob clockwise to enhance the
high-range frequencies.
!0 TONE (THR5/5A only)
Tone adjustment for the guitar’s sound.
Rotate the knob clockwise to brighten the
sound and counterclockwise to darken it.
!1 EFFECTS
On the THR10/10C/10X, or THR5, this
selects one of the four different effects;
CHORUS, FLANGER, PHASER, and TREM-
OLO.

On the THR5A, this selects one of the three
different effects; COMPRESSOR, COMPRES-
SOR/CHORUS, and CHORUS.

Yamaha THR10C Specifications

General

Amplifier class	-
RMS rated power	10 W
Number of speakers	2
Audio output channels	2.0 channels
Peak power per channel	5 W
Battery type	AA
Power source type	AC, Battery
Audio (L/R) in	1
Headphone connectivity	6.3 mm
Connectivity technology	Wired
Power cord included	Yes
Suitable for	Electric guitar
Product color	Black

Weight and Dimensions

Depth	120 mm
Width	271 mm
Height	167 mm
Weight	2800 g