Yamaha TT-S303 User Manual (English)

Other manuals for Yamaha TT-S303

Questions and Answers:

J
Jeremy BrownSep 7, 2025
What to do if my Yamaha Turntable skips or has distorted sound?
- J
  Julie YoungSep 7, 2025
  If you are experiencing skips, noise, or distorted sound with your Yamaha Turntable, there are several potential causes and solutions: * Ensure the stylus pressure is correctly adjusted by setting the counter weight markings to the stylus pressure specified for the cartridge. * Avoid using scratched or warped records. * Clean the record with a commercially available record cleaner. * Remove static charge using an anti-static brush. * Clean the stylus. * Replace the stylus if it is worn down. * Place the unit on a level location that is not subject to vibration.
A
Aaron CarterSep 9, 2025
Why is there no sound coming from my Yamaha TT-S303?
- T
  tara77Sep 9, 2025
  If you are not getting any sound from your Yamaha Turntable, check the following: 1. Make sure the head shell is correctly attached to the tone arm. 2. Verify that the RCA stereo cable is connected correctly. 3. Ensure that the mute setting of the amplifier is turned off.
V
Vanessa SmithSep 12, 2025
How to fix a humming sound in my Yamaha TT-S303?
- G
  Gerald HoltSep 12, 2025
  To address audible hum from your Yamaha Turntable: * Ensure the RCA stereo cable is correctly connected. * Use the lock nut to firmly secure the head shell to the tone arm.
P
pjonesSep 12, 2025
Why is the platter not spinning on my Yamaha TT-S303 Turntable?
- A
  Adrian HillSep 13, 2025
  If the platter on your Yamaha Turntable isn't rotating, here's what you should check: * Ensure the belt is correctly positioned on the platter and pulley. Attach it correctly if it has come off. * Make sure the power is turned on.
J
Julie HodgeSep 14, 2025
What to do if my Yamaha Turntable is causing feedback?
- S
  Susan SilvaSep 14, 2025
  To resolve feedback issues with your Yamaha Turntable: * Locate the unit farther away from the speakers. * Adjust the volume of the amplifier.
D
Donna RobertsSep 16, 2025
Why is the volume too low or too high on my Yamaha TT-S303?
- C
  Christopher HenrySep 16, 2025
  If the volume of your Yamaha Turntable is too weak or too loud, check the following: * Ensure the cartridge setting of the amplifier or phono equalizer is correctly set for the type of cartridge you’re using (MM or MC). * Verify that the PHONO EQ switch is set correctly for the connected device.

Yamaha TT-S303 Specifications

General

Type	Belt-drive audio turntable
Operation	-
Motor type	DC motor
Output level	140 mV
Product color	Black
Wow & flutter	0.2 %
Output voltage	2.5 mV
Stylus pressure	3.5 g
Platter material	Aluminum
Turntable speeds	33 1/3, 45 RPM
Signal-to-Noise Ratio (SNR)	67 dB
Overhang	19 mm
Arm length	223.5 mm
Tonearm type	Statically balanced tonearm
Quantity	1
Headshell	Yes
Power supply type	DC
Power consumption (standby)	0.1 W
Power consumption (typical)	1.5 W