Need help?Do you have a question about the Yamaha WR450F 2013 and is the answer not in the manual?
General| Displacement | 449cc |
|---|---|
| Bore x Stroke | 95.0mm x 63.4mm |
| Compression Ratio | 12.5:1 |
| Ignition | CDI |
| Final Drive | Chain |
| Front Tire | 80/100-21 |
| Seat Height | 38.6 in |
| Fuel Capacity | 2.0 gal |
| Width | 32.5 in |
| Transmission | 5-speed |
| Front Suspension | 11.8-in travel |
| Front Brake | Hydraulic single disc, 250mm |
| Rear Brake | Hydraulic single disc, 245mm |
Explains safety alert symbol, WARNING, NOTICE, and TIP notations.
Owner's responsibility, safe riding practices, pre-operation checks, and road rules.
Protective apparel, carbon monoxide risks, and loading safety guidelines.
Aftermarket parts, tires, rims, and safe motorcycle transport.
Identifies and describes components visible from the left side.
Identifies and describes components visible from the right side.
Diagram and list of handlebar controls and instrument panel elements.
Explains the main switch positions and the function of all dashboard indicator lights.
Details on the speedometer, odometer, tripmeters, clock, and stopwatch functions.
Operation of dimmer, turn signal, horn, engine stop, and start switches.
How to use the clutch lever, shift pedal, and brake lever for operation.
Fuel tank cap, brake pedal, starter knob, kickstarter, and steering lock.
Adjusting front fork rebound and compression damping forces.
Sidestand operation and the ignition circuit cut-off system's safety functions.
Procedures for starting cold and warm engines, including kickstarter use.
How to shift gears and tips for reducing fuel consumption.
Recommended steps for breaking in a new motorcycle engine.
Overview of maintenance intervals and the owner's tool kit.
Checking spark plug, engine oil, coolant, air filter, and brakes.
Drive chain slack, cleaning, lubrication, and checking cables and levers.
Checking tire pressure, tread depth, spoke wheels, and adjusting clutch/brake levers.
Procedures for replacing fuses, headlight, and signal light bulbs.
Steps for removing and installing the front and rear wheels.
Diagnostic charts for starting problems and procedures for engine overheating.
Guidelines for washing the motorcycle and preventing rust and corrosion.
Instructions for short-term and long-term storage of the motorcycle.
Detailed measurements, engine type, displacement, oil, fuel, and spark plug specifications.
Frame type, tire sizes, brake system, suspension, electrical system, and battery specs.
Location and importance of VIN and model label for parts ordering and registration.
To Next Page
