What to do if Yamaha YST-RSW300 turns on unexpectedly?
If your Yamaha Subwoofer turns on unexpectedly, it might be due to noise from external appliances. Try moving the subwoofer away from these appliances and/or reposition the connected speaker cables. Otherwise, set the AUTO STANDBY switch to the OFF position.
How to fix low sound on Yamaha Subwoofer?
If the sound level from your Yamaha Subwoofer is too low, it might be due to incorrectly connected speaker cables. Ensure they are connected correctly: L (left) to L, R (right) to R, “+” to “+” and “–” to “–.”
Why Yamaha Subwoofer has no power when STANDBY/ON is ON?
If your Yamaha Subwoofer isn't getting power, even with the STANDBY/ON switch in the ON position, first ensure that the power plug is securely connected. Also, check that the POWER switch is in the ON position.
How to fix Yamaha Subwoofer sound level too low?
If the sound level from your Yamaha Subwoofer is too low, ensure the speaker cables are correctly connected: L to L, R to R, “+” to “+” and “–” to “–”. Try setting the PHASE switch to the other position. Play a source sound with bass frequencies or set the HIGH CUT control to a higher position. Reposition the subwoofer or break up the parallel surface by placing bookshelves etc. along the walls, because it may be influenced by standing waves.
General| Type | Active subwoofer |
|---|---|
| Driver Size | 10 inches |
| Driver Type | Cone |
| Output Power | 100 W |
| Impedance | 8 ohms |
| Weight | 14.5 kg |
Provides a list of essential safety instructions and precautions for operating the unit.
Lists essential precautions for installation, environment, and handling to prevent damage or injury.
Identifies and describes the POWER switch and OUTPUT terminals on the rear panel.
Details the STANDBY/ON switch, AUTO STANDBY, PHASE, HIGH CUT, and VOLUME controls.
Explains how to turn the unit on/off or put it in standby mode using the power switch.
Details the AUTO STANDBY switch for automatic power-switching function.
Explains the PHASE switch for optimizing sound quality based on listening conditions.
Describes how to use the STANDBY/ON switch to turn the subwoofer on or put it into standby.
Describes how the HIGH CUT control adjusts the high frequency cut off point.
Explains how to adjust the volume level using the VOLUME control.
Guides users to choose between connecting via line output (pin jack) or speaker output terminals.
Details how to connect the subwoofer to the amplifier's line output (pin jack) terminals.
Illustrates connection diagrams for using one or two subwoofers with line output terminals.
Explains how to connect the subwoofer to the amplifier's speaker output terminals.
Illustrates connection diagrams for using one or two subwoofers with speaker output terminals (one set).
Instructs to plug the subwoofer and other components into the AC outlet after all connections are complete.
Guides on setting the VOLUME, POWER, and STANDBY/ON switch for initial use.
Details how to adjust HIGH CUT and VOLUME controls for optimal bass response.
Explains how to set the PHASE switch for better bass sound based on listening conditions.
Details how to change the AUTO STANDBY switch settings (LOW, HIGH, OFF).
To Next Page
