10/7/2015 Page 1 of 4 2HC-F28M1-V0_2 WINCH WIRING KIT
©Yamaha Motor Corporation, U.S.A. All rights reserved.
INSTALLATION INSTRUCTIONS
DESCRIPTION: Winch Wiring Kit
PART NUMBER: 2HC-F28M0-V0
MODEL: YXZ1000R
PARTS LIST:
Red Cable (+Battery to contactor)
Black Cable (-Battery to Contactor)
Yellow Cable (+Contactor to Winch)
Blue Cable (-Contactor to Winch)
* Part supplied with kit only and not available separately.
Jack for Winch Control unit
WARRANTY INFORMATION:
Genuine Yamaha Accessories are covered by a one-
year limited warranty against defects in material or
workmanship. Labor for replacement of defective
components is not covered. See your Yamaha dealer
for a copy of the warranty statement.
DEALER OR INSTALLER:
These instructions contain important information for
future reference and must be given to the customer.
NOTICE:
This installation requires a torque wrench and should
be performed by an authorized Yamaha dealer or
other qualified technician.
Please read and understand these instructions
completely before installation to avoid possible
injury, or damage to the accessory or vehicle.
COMPONENTS NOT INCLUDED IN THIS KIT:
WARN Vantage 3000 winch P/N SSV-F740C-T0-00
Winch mounts to:
Desert Grab Bar w/Winch Mount P/N 2HC-F84L0-T0 or
Trail Grab Bar w/Winch Mount P/N 2HC-F84L0-S0
2
nd
Battery Wiring Kit P/N 2HC-H21B0-V0
2
nd
Battery Box and Mount P/N 2HC-H212A-V0
To Next Page
Need help?
General
