To Next Page
J
john64Aug 6, 2025
What to do if my Yamato Construction Equipment is overheating?
- MMario RamirezAug 6, 2025
If your Yamato Construction Equipment overheats or overloads, it could be due to several reasons. It might be running at full load for too long, so try to allow for lighter, no-load intervals. Blocked motor housing fans can also cause this, so wear ANSI-approved eye protection and a NIOSH-approved respirator while using compressed air to blow dust out of the motor. Finally, using an extension cord that is too long or too small in diameter can strain the motor. Eliminate the extension cord if possible, or use one with an adequate diameter.
General