Yamazen W-Prep 2XY - User Manual

Service manual
YAMAZEN CORPORATION
Index
■
Cleaning of UV Flow Cell (A420, A421, A400, A401)
・・・・・・・・・1
■
How to Replace UV Flow Cell (A420, A421, A400, A401)
・・・・・・・・・1
■
How to Replace the UV Lamp (A390)
・・・・・・・・・2
■
How to Replace Pump Head Module (A217, A218) of AI-700X
・・・・・・・3-4
■
How to Replace Pump Head (A219 Piston Cylinder Group)
・・・・・・・・・5
■
How to Replace RH Assembly (A219 + P030 + P044)
・・・・・・・6-7
■
How to Replace PC boards in fraction collector
・・・・・・・・・8
■
How to Replace EEPROM
・・・・・・・・・9
■
How to Replace Solenoid Valve (A763) on Fraction Collector
・・・・・・・・10
■
How to Make Tubing with Fitting at its end
・・・・・・・・11
■
How to Make Flare Type Tubing
・・・・・・・・12
W-Prep 2XY
AI-580S
AI-700X

Summary

UV Flow Cell Maintenance

Cleaning UV Flow Cell

Procedure for cleaning the UV flow cell (A420, A421, A400, A401) by flushing in reverse.

Replace UV Flow Cell

Instructions for replacing the UV flow cell (A420, A421, A400, A401) by loosening screws and pulling a knob.

UV Lamp Replacement

Replace UV Lamp

Guide to replacing the UV lamp (A390) by removing covers, loosening screws, and disconnecting connectors.

Pump Head Module Replacement

Replace Pump Head Module Al-700 X

Steps to replace the pump head module (A217, A218) on the Al-700X, involving cover removal and dial loosening.

Replace Pump Head Al-580 S;W-Prep2 XY

Procedure for replacing the pump head (A219 Piston Cylinder Group) on Al-580S & W-Prep2XY.

Component Replacement Procedures

Replace RH Assembly

Guide for replacing the RH Assembly (A219 + P030 + P044) by removing sheet metal and screws.

Replace PC Boards

Instructions for replacing PC boards in the fraction collector by removing and inserting screws and boards.

Replace EEPROM

Steps to replace EEPROM (firmware) using a puller and ensuring correct orientation for installation.

Replace Solenoid Valve

Procedure for replacing the solenoid valve (A763) on the fraction collector, involving screws and signal cables.

Tubing Management

Make Tubing with Fitting

Instructions on how to attach a fitting to tubing by inserting it into the fitting and tightening screws.

Make Flare Type Tubing

Guide to creating flare type tubing by heating, pushing, and screwing a flare nut onto a fixture.

Yamazen W-Prep 2XY Specifications

General

Brand	Yamazen
Model	W-Prep 2XY
Category	Laboratory Equipment
Language	English