Need help?Do you have a question about the Yanmar 6CHL-N and is the answer not in the manual?
General| Engine Model | 6CHL-N |
|---|---|
| Number of Cylinders | 6 |
| Engine Type | Diesel |
| Type | In-line |
| Cooling System | Water-cooled |
| Starting System | Electric starting |
| Lubrication System | Forced lubricating system |
Cuts off fuel supply when pulled out to stop the engine completely.
Procedures to remove air from the fuel system for proper injection.
Checklist of items to verify before starting the engine.
Step-by-step guide for starting the engine using the starter switch and setting initial speed.
Procedures to check engine condition and fluid levels after initial start.
Instructions for warming up the engine at low RPM and checks to perform during this period.
Guidelines for operating the engine at low load and checks to perform.
Procedures for safely stopping the engine using the stop knob and battery switch.
A comprehensive table detailing maintenance items, frequency, and reference pages.
Table of key adjustment values (timing, pressure, clearance) for different models.
Specifies torque values for critical engine components like cylinder head and flywheel.
Detailed procedures for major checks and servicing of engine systems.
Procedure for changing engine lube oil, including warm-up and oil removal methods.
Procedures for draining and checking the fuel injection valve for proper spray pattern.
To Next Page
