Need help?Do you have a question about the Yanmar 6CXBM-GT and is the answer not in the manual?
Details critical safety precautions for operation, including hazards related to fuel, battery, burns, and moving parts.
Covers safety measures during inspection, including battery fluid, electrical shorts, hot surfaces, and waste disposal.
Explanation of various alarm lamps (Battery Charge, Coolant Temp, Oil Pressure, etc.) and their causes.
Pre-start checks, throttle and shift handle positioning, and engaging the starter switch.
Verifying the proper function of alarm devices (buzzer, lamps) after the engine starts.
Detailed steps for starting the engine in cold conditions, including glow plug operation.
Monitoring seawater output, coolant temperature, exhaust gas color, and other operational conditions.
Steps for safely stopping the engine, including no-load running, remote stop, and shutting down systems.
Comprehensive schedule outlining maintenance tasks based on operating hours or time intervals.
Procedure for adjusting valve clearance while the engine is cold, including parallel and bridge adjustments.
Steps to inspect and adjust the fuel injection timing by aligning flywheel and pump markings.
Clearing turbocharger pre-filter, checking joint areas, and overhaul recommendations.
Guide to identifying and resolving common starting and operation failures with appropriate countermeasures.
Flowchart and table to diagnose and fix issues preventing the engine from starting, covering fuel, electrical, and mechanical causes.
Diagnosing why alarm lamps and buzzers do not function when the starter switch is ON, related to alternator or electrical system.
Diagnosing the cause of the lubricating oil pressure alarm lamp coming on, checking pressure, oil level, and system.
Diagnosing high lubricating oil temperature alarm, checking oil level, seawater discharge, and passage clogging.
Diagnosing high coolant temperature alarm, checking coolant level, seawater discharge, and passage clogging.
Diagnosing causes of black smoke, including overloading, seawater passage clogging, air shortage, and fuel injection issues.
To Next Page
General
